XNACS07-GB2015 Dual-gun AC EV Charger
Dual-gun AC charger, model XNACS07-GB2015. 4G Cat-1, MQTT provisioning with a USB setup file, left and right gun control from ThingsBoard. Dashboard for ThingsBoard 4.4.1 and later.
Product
| Dual-gun AC EV charger | |
|---|---|
| Model | XNACS07-GB2015 |
| Guns | Left and right |
| Output | AC 220 V, up to 32 A on the 7 kW setting |
| Connector | GB/T 20234.2, 3.5 m cable on the published 7 kW model |
| Input | AC 220 V 50 Hz, 3 x 6 mm² |
| Size | 280 x 400 x 120 mm |
| Ingress | IP54 |
| Network | 4G Cat-1 |
| Payment | WeChat mini program, prepaid |
Specification: 7 kW AC charger.
K3 down is the 32 A / 7 kW setting. K3 up is 24 A. K4 down is MQTT over TLS on port 8883, K4 up is plaintext MQTT on port 1883. The DIP switches and the USB port are on the controller board inside the charger, behind the front cover.
Telemetry
The charger sends:
| Key | Meaning |
|---|---|
_voltageL, _voltageR |
Gun voltage, volts |
_curL, _curR |
Gun current, milliamps |
_energyL, _energyR |
Session energy, watt-hours |
_powL, _powR |
Gun power, watts |
_stateL, _stateR |
Charge state, see the codes below |
_stpL, _stpR |
Stop reason, see the codes below |
_swtL, _swtR |
Output switch |
_cpL, _cpR |
Control-pilot reading |
_holsterL, _holsterR |
Holster |
_tmpL, _tmpB, _tmpR |
Left gun, board, and right gun temperature, °C |
_volgnd |
Line-to-ground reading, volts |
_lteSign |
LTE RSSI |
_stopkey |
Emergency stop input |
Codes
_stateL and _stateR, the charge state:
| Value | Meaning |
|---|---|
| 0 | Idle |
| 1 | Gun inserted, waiting for the vehicle |
| 2 | Control-pilot handshake |
| 3 | Ready to charge |
| 4 | Vehicle ready |
| 5 | Contactor closing |
| 6 | Charging |
| 7 | Stopping |
| 8 | Output off |
| 9 | Reset |
_stpL and _stpR, the stop reason:
| Value | Meaning |
|---|---|
| 0 | No stop |
| 3 | Gun removed during the charge |
| 4 | Normal stop, from the gun button or from a server time-out |
| 5 | Prepaid balance exhausted |
| 6 | Over-current or voltage drop |
| 7 | Fault: control pilot lost, ground fault, or residual-current test failed |
| 9 | Stopped from the dashboard |
Add Your Device to the Community
Built or ship IoT hardware? Package your device as a ZIP and publish it to the IoT Hub so users can provision it in one click.