Street Lighting
The Street Lighting template is a ready-to-run accelerator for cities, municipalities and lighting contractors. It brings every lamp of a district onto one map: whether it is lit, dimmed, off, faulty or offline, how much power it draws, its supply voltage and burning hours — with street and district totals, alarms and per-lamp light control.
💡 Solution Description
The Street Lighting template is a ready-to-run accelerator for cities, municipalities and lighting contractors. It brings every lamp of a district onto one map: whether it is lit, dimmed, off, faulty or offline, how much power it draws, its supply voltage and burning hours — with street and district totals, alarms and per-lamp light control.
✨ Highlights
Turn connected LED street lamps into an observable lighting network with the Street Lighting solution template. Designed for city lighting operators, utilities and facility contractors. 🏙️💡
Press Install to get a district with two streets and ten lamps on a real map, three days of hourly demo history that follows a real dimming schedule, calculated fields, alarm rules and a dashboard to run it all.
📦 What’s inside the box?
- 🗺️ Overview: District KPIs — lamps online, lamps lit now, load now, energy tonight, average supply voltage, active alarms — the lamp map with every lamp colored by its state, the lamp-status breakdown and active alarms by severity. Click a lamp for its readings and open its details.
- 🛠️ Management: Streets and their lamps in one expandable table next to the map. Draw street traces a new street on the map, Place lamp puts a new lamp exactly where it stands and links it to the nearest street; edit or delete streets and lamps right from the table.
- 💡 Lamp details: Brightness, power, voltage, energy tonight and burning hours; power & brightness and supply-voltage charts; light control (on/off and brightness), the lamp’s last 12 hours and its alarms.
- 🎬 Realistic demo data: Lamps run at full brightness in the evening, dim through the night and come back to full before dawn, in the local time zone, whenever you install the template (for a lively demo they also stay lit through the day). The district also has a lamp with a driver fault, a lamp near end of life and two lamps on manual override.
🌟 Why use this template?
- ⚡ Energy at a glance: Load now, energy tonight and savings against full brightness, per lamp, street and district.
- 🔧 Maintenance that plans itself: Burning hours against the rated life tell you which lamps to replace before they fail.
- 🚨 Faults found before the complaints: A lamp that should be lit but draws no current is flagged as a driver fault right away.
- 🧭 Real map, real streets: Streets are drawn along their real routes and lamps sit at their coordinates — draw your own streets and place your lamps in minutes.
🌍 Real-World Applications
- 🏙️ Cities and municipalities: Street, park and square lighting across districts.
- 🏗️ Lighting contractors and ESCOs: Prove energy savings and plan maintenance for the lamps you operate.
- 🏢 Campuses, ports and industrial sites: Outdoor lighting of private roads, yards and parking areas.
Share Your Solution with the Community
Built a complete IoT solution? Package it as a ZIP archive — dashboards, rule chains, profiles, calculated fields, devices, and emulators — and publish it to the IoT Hub so others can deploy your architecture in one click.